Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /grub/stage2 and /grub/menu.lst.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /grub/stage2 and /grub/menu.lst.
sda1: _________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: _________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sdb1: _________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sdb2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb6: _________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
md0: _________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst
md1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /etc/fstab
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 192,779 192,717 fd Linux raid autodetect
/dev/sda2 192,780 976,768,064 976,575,285 5 Extended
/dev/sda5 192,843 8,000,369 7,807,527 82 Linux swap / Solaris
/dev/sda6 8,000,433 976,768,064 968,767,632 fd Linux raid autodetect
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 192,779 192,717 fd Linux raid autodetect
/dev/sdb2 192,780 976,768,064 976,575,285 5 Extended
/dev/sdb5 192,843 8,000,369 7,807,527 82 Linux swap / Solaris
/dev/sdb6 8,000,433 976,768,064 968,767,632 fd Linux raid autodetect
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/md0 2c270fda-d49d-4cb0-8ee2-6b32936824b6 ext2
/dev/md1 a4a547e4-d499-4ec2-9119-bc245ae0fddd ext3
/dev/sda1 85a93a16-93a1-b3dd-8245-623813e4882c linux_raid_member
/dev/sda2: PTTYPE="dos"
/dev/sda5 b52ce487-142e-4acc-8337-4e0aeed66d5f swap
/dev/sda6 eefdc9ca-bfd8-8649-3e9a-d16b4e3ed730 linux_raid_member
/dev/sda: PTTYPE="dos"
/dev/sdb1 85a93a16-93a1-b3dd-8245-623813e4882c linux_raid_member
/dev/sdb2: PTTYPE="dos"
/dev/sdb5 ed908a4c-9b9e-415e-9424-9457d85d103e swap
/dev/sdb6 eefdc9ca-bfd8-8649-3e9a-d16b4e3ed730 linux_raid_member
/dev/sdb: PTTYPE="dos"
error: /dev/sdc: No medium found
error: /dev/sdd: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/md1 / ext3 (rw,relatime,errors=remount-ro,commit=0)
/dev/md0 /boot ext2 (rw,relatime)
/dev/sr0 /media/cdrom0 iso9660 (ro,nosuid,nodev,utf8,user=user1)
============================== md0/grub/menu.lst: ==============================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/md1 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.10, kernel 2.6.35-22-generic
root (hd0,0)
kernel /vmlinuz-2.6.35-22-generic root=/dev/md1 ro quiet splash
initrd /initrd.img-2.6.35-22-generic
title Ubuntu 10.10, kernel 2.6.35-22-generic (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.35-22-generic root=/dev/md1 ro single
initrd /initrd.img-2.6.35-22-generic
title Ubuntu 10.10, memtest86+
root (hd0,0)
kernel /memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
==================== md0: Location of files loaded by Grub: ====================
.0GB: grub/menu.lst
.0GB: grub/stage2
.0GB: initrd.img-2.6.35-22-generic
.0GB: vmlinuz-2.6.35-22-generic
================================ md1/etc/fstab: ================================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/md1 during installation
UUID=a4a547e4-d499-4ec2-9119-bc245ae0fddd / ext3 relatime,errors=remount-ro 0 1
# /boot was on /dev/md0 during installation
UUID=2c270fda-d49d-4cb0-8ee2-6b32936824b6 /boot ext2 relatime 0 2
# swap was on /dev/sda5 during installation
UUID=b52ce487-142e-4acc-8337-4e0aeed66d5f none swap sw 0 0
# swap was on /dev/sdb5 during installation
UUID=ed908a4c-9b9e-415e-9424-9457d85d103e none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/scd1 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0 0
==================== md1: Location of files loaded by Grub: ====================
.0GB: initrd.img
.0GB: vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdc sdd
Gee! These Aren't Roasted!
Originally Posted by Quackers
Posting Permissions
Adv Reply
Bookmarks